TEIN Street Basis Coilover - Cube Cubic YGNZ11 Tiida C11 JC11 NC11 SJC11
85589
JPY
TEIN
SKU: 79742
PN: GSP58-11AS2This series of coilover suspension has great cost-performance which will allow for a wide range of safe ride-height adjustability. Get a little improvement of sportiness and big improvement on stance. Dampening adjusting ability is unavailable since Basic Compact was not designed with hard sports driving in mind, but for daily driving. Get this and all your JDM at RHDJapan!!
Brand: TEIN
Product: Street Basis Coilover
Part Num: GSP58-11AS2
PRODUCT NOTES:
Upper Mounts are not included, Stock OEM Upper Mounts must be used for proper installation to the Street Basis Coilovers.
Springs Specifications:
Spring Rate:
- Front: 4.0K (225mm)
- Rear: 4.1K (163mm)
Stock Height Difference (mm):
- Front: -35
- Rear: -45
Max Adjustability (mm):
- Front: +0 ~ +0
- Rear: +0 ~ +0
Recommended Adjustability (mm):
- Front: -45 ~ -25
- Rear: -55 ~ -40
Product: Street Basis Coilover
Part Num: GSP58-11AS2
PRODUCT NOTES:
Upper Mounts are not included, Stock OEM Upper Mounts must be used for proper installation to the Street Basis Coilovers.
Springs Specifications:
Spring Rate:
- Front: 4.0K (225mm)
- Rear: 4.1K (163mm)
Stock Height Difference (mm):
- Front: -35
- Rear: -45
Max Adjustability (mm):
- Front: +0 ~ +0
- Rear: +0 ~ +0
Recommended Adjustability (mm):
- Front: -45 ~ -25
- Rear: -55 ~ -40
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Nissan Cube Cubic YGNZ11 HR15DE (05/2005-01/2007)
Nissan Cube Cubic YGNZ11 HR15DE (01/2007-11/2008)
Nissan Tiida C11 HR15DE (09/2005-12/2007)
Nissan Tiida C11 HR15DE (01/2008-08/2009)
Nissan Tiida C11 HR15DE (09/2009-03/2010)
Nissan Tiida JC11 MR18DE (09/2005-12/2007)
Nissan Tiida JC11 MR18DE (01/2008-08/2009)
Nissan Tiida JC11 MR18DE (09/2009-03/2010)
Nissan Tiida NC11 HR15DE (09/2005-12/2007)
Nissan Tiida NC11 HR15DE (01/2008-08/2009)
Nissan Tiida NC11 HR15DE (09/2009-03/2010)
Nissan Tiida Latio SJC11 MR18DE (09/2005-12/2007)
Nissan Tiida Latio SJC11 MR18DE (01/2008-08/2009)
Nissan Tiida Latio SJC11 MR18DE (09/2009~)
Nissan Cube Cubic YGNZ11 HR15DE (05/2005-01/2007)
Nissan Cube Cubic YGNZ11 HR15DE (01/2007-11/2008)
Nissan Tiida C11 HR15DE (09/2005-12/2007)
Nissan Tiida C11 HR15DE (01/2008-08/2009)
Nissan Tiida C11 HR15DE (09/2009-03/2010)
Nissan Tiida JC11 MR18DE (09/2005-12/2007)
Nissan Tiida JC11 MR18DE (01/2008-08/2009)
Nissan Tiida JC11 MR18DE (09/2009-03/2010)
Nissan Tiida NC11 HR15DE (09/2005-12/2007)
Nissan Tiida NC11 HR15DE (01/2008-08/2009)
Nissan Tiida NC11 HR15DE (09/2009-03/2010)
Nissan Tiida Latio SJC11 MR18DE (09/2005-12/2007)
Nissan Tiida Latio SJC11 MR18DE (01/2008-08/2009)
Nissan Tiida Latio SJC11 MR18DE (09/2009~)
Customers who bought this product also purchased
Product Reviews
Submit a review now and earn 20 Reward points once the review is approved.
Applies only to registered customers, may vary when logged in.
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Amazing Review by Richard
Excellent addition to my 800hp B18 LS / Vtec build. Super fast shipping to United States
Car Garage Amis Pod - FD2 Review by Blake
I've paired this with the Defi A1 guages. Two fit snug just fine and one slot was too loose, I used electrical tape to hold to the guage in place. Now the position of the pod causes reflections in the windscreen so I put defi meter visors on but only cover half of the Gauge appearing on the windscreen so will need to get some 3D printed super long visors to not get any reflections as it becomes real bad at night. However on track the position of the guages is perfect and easy to monitor during racing.
best seller Review by Denny
RHD top best seller.
Very low dust, no noise and great pedal feel Review by Thomas
The Endless SSM+ brake pads was exactly what I was looking for in a brake pad. These pads have good modulation, are very low dust and is silent. My previous pads on the Brembo calipers had good initial bite but were super dusty and had ridiculously loud squealing, these pads aren't cheap but the switch was worth it! RHD Japan support was also top notch in assisting in my inquires!
Great handling and engine bay dress up mod Review by Thomas
The Beatrush strut bar is a great addition to the mx-5 handling performance keeping the car stable during cornering. It was easy to install and the integrated brake cylinder stopper is a great addition. The gold and aluminium also looks great and stands out in the engine bay!
